Enable the Bluetooth on your phone. You can find the device name "Soundcore Life Note " or “Soundcore Life Note-L” on the Bluetooth list. Please click "Soundcore Life Note " or “Soundcore Life Note-L” for pairing, the white light will flash slowly, which means it paired successfully.

Then, how do you pair Soundcore note earbuds?

(1)Manually turn both earbuds off; (2) Press and hold the button on both earbuds for 3 seconds when earbuds are turned off. Then the left and right earbuds can connect with different device. see less If you use both earbuds at a time, then you can only pair them to one device.

Secondly, why is my Anker Soundcore not connecting? If your device is out of range of your speaker, they will not be able to maintain a Bluetooth connection. Remove any obstacles between the speaker and your device, and move your device as close as you can to your ANKER SoundCore and try to pair again.

Similarly, it is asked, how do you pair Soundcore life wireless earbuds?

Open up the Soundcore case, take out the earbuds. One of the earbuds will be the flashing white rapidly. You will see Soundcore Life P2 listed, Click on Connect. Note: If one of the earbuds is not flashing white rapidly, plug them back into your computer to charge them.

How do you reset Anker Soundcore life?

RESET

  1. You might need to reset the earbuds if you experience any connectivity problems or function issues.
  2. Place the earbuds into the charging case and make sure they are being charged. Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3 times and then turn white.

Related Question Answers

How do I re pair Soundcore?

Take both earbuds out of the charging case and place them near each other. The white LED indicators will start flashing in white(breathing-like). 4. Once the white LED indicator on right earbud starts flashing quickly, go to the Bluetooth pairing list on your device and select "Soundcore Liberty Air".

How do you pair Anker Soundcore mini?

Turn on the SoundCore Mini 2 speaker pressing the “Power” button on the unit's left side. Then select the Bluetooth mode by pressing the “Bluetooth” button which is also located on the unit's right side. The speaker is now ready for pairing.

How do you reset Soundcore earbuds?

Place one earbud in the charging case and make sure it's charging (The LED indicator will be solid white) Step 3. Tap and hold the multifunction touchpad of the earbud (currently in the charging case)for 7 seconds until the LED indicator flashed 3 times. This clears the paring information.

How do I get both Soundcore life Notes earbuds to work?

When powered off, press and hold the multi-function button on both earbuds for 1 second, the earbuds will enter TWS connecting mode. When powered on and connected, place either one of the earbuds into the charging case, you can keep using the other one.

How do you put Soundcore life dot 2 in pairing mode?

Bluetooth Pairing with your Device
  1. Take the earbuds out of the charging case or manually power on the earbuds, the. earbuds enter the Bluetooth pairing mode successfully when the LED indicator on either earbud flashes white.
  2. Turn on Bluetooth on your device and click “Soundcore Life Dot 2”.

How do I reset my Soundcore icon?

Resetting to factory settings - Instructions
  1. switch on the Anker Soundcore Bluetooth speaker via the power key.
  2. press and hold the Bluetooth button for at least 20 seconds.
  3. switches the anchor Soundcore off again.
  4. switches the anchor Soundcore on again.

How do I connect my Anker Soundcore to my IPAD?

Turn on the Bluetooth mode on your mobile device. It will automatically search for other Bluetooth enabled devices nearby. Select the “Anker SoundCore” device from the list. Has the pairing been successful, the speaker's LED will stay solid blue.

How do you reset an Anker speaker?

Regarding the issue you mentioned, please try following tips to see if any help:
  1. Confirm the speaker is fully charged.
  2. Reset the speaker by pressing and holding the Mode button for 3 seconds.
  3. Clear that speaker from your Bluetooth's memory,then test it again.
  4. Try using an aux audio cable to see if sound comes out.

Why is my Anker Charger not working?

Ensure the outlet you're connected to is working. If possible, try connecting another device to that outlet to see if it works. If your portable PowerCore charger is not charging quickly, try using another wall charger. A two-amp charger will fully recharge your device over 12 hours.

What is the mode button on Anker speaker?

The battery level is low. The battery is charging OR speaker is set to the AUX mode. The complete charging time is approx 2-3 hours.

Additional Information.

Function Button How To / Control
Mode Switch Press the Mode button to switch between Bluetooth / AUX / FM Radio / SD Card

How do you sync Anker SoundCore 2?

If you want to connect the Anker SoundCore 2 speaker with another device, simply turn off the Bluetooth function on the first device (for instance “disconnect”) OR press the Bluetooth button for approx 2 seconds. The Anker SoundCore 2 will switch back to the pairing mode in order to connect to another device.